Ekoplast Stantsl Ukraine develops and implements complex programs and projects in the field of water technologies, also the company produces equipment, systems and advanced solutions for storage and consumption of water and autonomous sewerage. The company has more than 400 successful projects in the field of water treatment, drainage and protection of water bodies.
The company offers the following products and solutions in the field of industrial and domestic water technologies:
- Domestic wastewater treatment stations (autonomous sewerage);
- Water treatment and drainage systems;
- Complex projects in the field of water management and implementation of them;
- Municipal wastewater treatment systems;
- Industrial wastewater treatment systems;
- Water storage tanks.
Domestic wastewater treatment
For 15 years, the company has been designing and producing equipment for domestic wastewater treatment under the registered trademark of the autonomous sewage system "Bioline". More than 400 such sewerage systems successfully operate only in Ukraine.
Developments in the production and usage of wastewater treatment systems were supported by the Ministry of Environmental Protection, and the experience of using treated wastewater for irrigation of forest and park plantations in the recreational zone of the South Coast of Crimea was recognized as successful and recommended for use in any recreational areas.
Autonomous sewerage "BiNeo" has been serially manufactured since 2002, it is designed for underground, semi-submerged and surface positions. The main construction materials for the plants are concrete and plastic.
The wastewater treatment technology used in autonomous sewerage systems BiNeo is based on the use of mechanical (sedimentation) and biological (aerobic oxidation) methods. The plants operate in extended aeration mode, using nitrification and denitrification processes. Wastewater treatment provides indicators that meet the requirements of the current legislation of Ukraine: the Rules for protection of surface water from pollution by wastewater, SanPiN 4630, SanPiN 4631, sanitary-hygienic and technological requirements of the consumer, treated wastewater is safe for human health and exclude negative impact on the environment. The main advantages of BiNeo series units are simplicity of design and the absence of complicated regulations during exploitation.
Advantages of all BiNeo series autonomous sewage systems:
- compactness - all equipment can be easily placed in a limited space;
- versatility - plants can be used both as independent equipment for local wastewater treatment before discharge into the municipal sewage system, and as part of a complex of treatment facilities as a unified factory-made technological apparatus;
- variability - the possibility of optimal selection of equipment depending on the amount of effluents to be treated using a standard range of plants and the possibility of increasing productivity due to the use of multiple running installations of the same power in parallel
- low power consumption;
- corrosion resistance in aggressive wastewater environment;
- long service life of the case - more than 20 years;
- high manufacturing readiness level
- no moving parts;
- ease of installation and maintenance.
Qualification and practical experience of the company's engineers and technicians allow not only to select the optimal equipment of the required performance, but also to solve issues of wastewater supply, its additional treatment, and give recommendations on the disposal of treated water in relation to the specific conditions of the facility construction.
The overall dimensions of typical plants can be adapted and changed taking into account the specific conditions of construction and installation.
The company's service programs ensure long-term and trouble-free plants operation without constant presence of maintenance personnel.
Municipal wastewater treatment systems
Municipal wastewater is a mixture of domestic, rainfall and industrial wastewater in different proportions. While treatment methods are the same combination of mechanical and biological treatment, municipal wastewater treatment requires broader design and consideration of more factors. Municipal systems include sedimentation and capture stations, reservoirs, biological treatment plants, pumping stations, pipeline systems and building solutions in general. The company has got innovative solutions, resources and experience in performing tasks of any complexity to create these systems. As practice has shown, local treatment facilities (LFT) can't be an alternative to centralized communal treatment facilities, but significantly expand the tools for water bodies protection from pollution and improvement of the environmental situation in settlements.
Therefore, the company's approach is to use various methods and technologies for intercepting flows and pollution, including centralized and local solutions which form a modular and adaptable system for municipal wastewater treatment.
The company supplies factory-made local biological treatment systems for domestic wastewater treatment and carries out construction and reconstruction of capital treatment facilities. The use of local systems even in conditions of urban development and the presence of centralized networks allows solving the problem of uncontrolled volumes of polluted wastewater entering city networks (illegal tie-ins).
Surface effluents, including rainwater, melted and washing effluents Surface effluents is the cause of oil products, heavy metals, toxic substances and other hazardous contaminants inflows entering water bodies. The importance of surface effluents treatment has been underestimated for a long time, and the accumulated problems require systemic and professional solutions in laying of surface effluents drainage lines and cleaning them from contamination before entering the reservoir that Ecoplast Stantsl Ukraine is ready to develop and implement.
One of the well-proven solutions is COS series (coalescent oil separator) plants for water purification from oil products. The plants are produced according to ТУ У 29.2-32192932-003-2005 and can be used as independent equipment for local wastewater treatment before discharge into the sewer or onto relief, or into a waterbody, as well as a part of a complex of treatment facilities as a unified factory-made technological machine.
The main consumers of the equipment are gas stations, parking lots, enterprises that store and process oil products, machine-building enterprises with degreasing processes.
Our systems are installed and operate at filling stations of the well-known networks WOG, OKKO, Yukon, at the sites of enterprises of Dneproshina OJSC, EPICENTER supermarket, agricultural complexes "Agrotek Invest", "Agrofirma Mayak", "Agro-industrial company Mais", "Maïsadour Semences Ukraine".
The throughput of typical COS plants is from 5 litre/sec to 200 litre/sec, which allows cleaning rainwater from areas of approximately 410 m2 to 18,000 m2.
Industrial effluents
The company "Ekoplast Stantsl Ukraine" performs development, production and implementation of modern high-performance technologies and equipment for wastewater treatment at wastewater disposal facilities of industrial enterprises.
A wide range of industrial wastewater contaminants, the difficulty of removing them by traditional treatment methods, the mode of intake and significant fluctuations in concentrations in wastewater require a variety and combination of known methods of wastewater treatment and constant search for new ones, as well as treatment of the resulting sediments, silts and sludge, the usage of more complex installations and equipment than for domestic wastewater treatment.
The company's specialists take a comprehensive approach to solving water disposal issues, using modern researches and technologies for industrial wastewater treatment.
Our specialists have work experience with wastewater from enterprises in the following industries:
- Food industry
- dairy industry
- metallurgical industry
- livestock farming
- machine building, etc.
Based on the composition of wastewater, the requirements for treated water and wishes of a customer, various treatment methods are used:
- mechanical (settling, filtration);
- chemical (neutralization, chemical precipitation, oxidation);
- physicochemical (coagulation, flocculation, membrane purification methods, ion exchange, sorption).
We use modern equipment, both of our own production and leading European production in our technological solutions.
Local solution for water storage tanks - Polymer containers made of materials certified for drinking water storage. These containers get useful properties of the materials they are made of, mainly, resistance to aggressive environments and hygiene - the possibility of safe food and drinking water storage.The most common and proven solution is sheet polyethylene and polypropylene containers produced by welding.
The main advantages of welded tanks are:
- Flexibility in the choice of shapes, sizes and designs;
- Durability;
- Can be assembled on site to solve the problem of container placement in rooms with limited access and maximize free space.
These advantages make it possible to create reservoirs for water storage in restricted spaces.
Using welded polymer containers, engineers are not limited in choice of the type and design of piping, technological and control systems.